Suppliers of New and Used Commercial Woodworking Machinery for 37 Years

New Sedgwick TESH 3 Tenoner
New Sedgwick TESH 3 TenonerMachines

New Sedgwick TESH 3 Tenoner

New Sedgwick TESH 3 Tenoner Taking only minutes to set up, the Sedgwick TE/TESH is easy to use and accurate in operation. Work is positioned on the rolling table against an end stop and a fence, and is secured by a cam action clamp. Its end is then passed between two vertically mounted cutterheads which machine the top and bottom cheeks of the tenon. The tenon width is set by raising or lowering the top motor, and its position on the timber by raising/lowering the two motors in tandem. Variations in shoulder length are set using the rule on the end stop, and staggered tenons are achieved by simple handwheel adjustment of the top motor, again reading from a rule. 2 x 3hp Tenon heads 1 x 5hp scribe head

Condition
New
Timber Capacity
130mm X 310mm

Enquire About This Product

* Required